LFY-650 Comprehensive protective mask flame retardant performance tester
It is mainly used to test the combustion performance of comprehensive protective masks after being ignited by six different parts of the flame at the same time for a certain period of time. It is a special test instrument for the flame retardant performance of comprehensive protective masks.
The main purpose
It is mainly used to test the combustion performance of the comprehensive protective mask (full-face mask) after six different parts of the flame are ignited at the same time for a certain period of time. It is a special test instrument for the flame-retardant performance of the comprehensive protective mask.
Instrument characteristics
1. The full face mask fixture is a metal human head mold, which can fully simulate the actual use state of the full face mask.
2. The burner is equipped with propane gas interface.
3. The burner flame height is adjustable.
4. The head mold fixture can be adjusted at will in the vertical and horizontal directions.
5. The ignition time is automatically recorded and digitally displayed.
6. Equipped with flame temperature measurement probe and flame temperature display.
Technical index
1. The total air flow of six igniters is (21±0.5) L/min
2. The flame height can be adjusted
3. The diameter of the flame temperature measuring probe is 1.5mm
4. The flame temperature at the height of 250mm from the top of the burner is (950±50)℃
5. The distance between the top of the burner and the six ignition points of the mask is 250mm
6. The wall thickness of the metal head mold is 2～3mm, flame-resistant and burn-resistant
7. Ignition time timer: 0-99.99 seconds, accuracy: ±0.01 seconds
8. Power supply: AC220V, 50Hz, 50W
Applicable standards
GA 124-2013 positive pressure fire air breathing apparatus
GA 632-2006 positive pressure fire oxygen breathing apparatus
GB/T 16556-2007 Self-contained open-circuit compressed air breathing apparatus
BS EN 136 Respiratory protective devices—Full face masks—Requirements, testing, marking, 8.5.2 Class 2 and Class 3 full face masks
It is mainly used to test the combustion performance of the comprehensive protective mask (full-face mask) after six different parts of the flame are ignited at the same time for a certain period of time. It is a special test instrument for the flame-retardant performance of the comprehensive protective mask.
Instrument characteristics
1. The full face mask fixture is a metal human head mold, which can fully simulate the actual use state of the full face mask.
2. The burner is equipped with propane gas interface.
3. The burner flame height is adjustable.
4. The head mold fixture can be adjusted at will in the vertical and horizontal directions.
5. The ignition time is automatically recorded and digitally displayed.
6. Equipped with flame temperature measurement probe and flame temperature display.
Technical index
1. The total air flow of six igniters is (21±0.5) L/min
2. The flame height can be adjusted
3. The diameter of the flame temperature measuring probe is 1.5mm
4. The flame temperature at the height of 250mm from the top of the burner is (950±50)℃
5. The distance between the top of the burner and the six ignition points of the mask is 250mm
6. The wall thickness of the metal head mold is 2～3mm, flame-resistant and burn-resistant
7. Ignition time timer: 0-99.99 seconds, accuracy: ±0.01 seconds
8. Power supply: AC220V, 50Hz, 50W
Applicable standards
GA 124-2013 positive pressure fire air breathing apparatus
GA 632-2006 positive pressure fire oxygen breathing apparatus
GB/T 16556-2007 Self-contained open-circuit compressed air breathing apparatus
BS EN 136 Respiratory protective devices—Full face masks—Requirements, testing, marking, 8.5.2 Class 2 and Class 3 full face masks